General Purpose Pressure Regulator

The General purpose BVR-Series pressure reducing regulators offer consistent and reliable pressure control. The BVR can be manually adjusted to specific output pressures based on the internal spring and the force that spring creates. A maximum inlet pressure of 300 PSI (21 Bar) can be reduced to various pressure ranges. This general purpose pressure regulator is made from zinc and/or aluminum with a brass valve and nylon valve cap.

Description

The BVR series of general purpose pressure regulators are available in multiple port sizes from 1/2″ up to 1-1/2″ with max potential flow rate of 750 CFM.

Additional information

BVR02N	1/4" NPT Inlet & Outlet Ports, Diaphragm sensed pressure reducing regulator. Available with 4 spring ranges up to 175 PSI
BVR03N	3/8" NPT Inlet & Outlet Ports, Diaphragm sensed pressure reducing regulator. Available with 4 spring ranges up to 175 PSI
BVR04N	1/2" NPT Inlet & Outlet Ports, Diaphragm sensed pressure reducing regulator. Available with 4 spring ranges up to 175 PSI
BVR06N	3/4" NPT Inlet & Outlet Ports, Piston sensed pressure reducing regulator. Available with 4 spring ranges up to 150 PSI
BVR08N	1" NPT Inlet & Outlet Ports, Piston sensed pressure reducing regulator. Available with 4 spring ranges up to 150 PSI
BVR10N	1-1/4" NPT Inlet & Outlet Ports, Piston sensed pressure reducing regulator. Available with 3 spring ranges up to 150 PSI
BVR12N	1-1/2" NPT Inlet & Outlet Ports, Piston sensed pressure reducing regulator. Available with 3 spring ranges up to 150 PSI
Ambient Temps	40° to 175°F (4° to 79°C)
Body	Zinc (1/4" to 1/2"), Aluminum (3/4" to 1-1/2")
Dome	Aluminum
Fluid Media	Compressed Air
Inlet Pressure	300 PSIG (21 Bar) maximum
Panel Mounting	2-1/16" (52mm) hole required